Osprey Talon G2 model SAH-E23, User Manual

Page: 45 / 50

Osprey Talon User Guide
44
© 2016 Osprey Video. Osprey®, Ceylon® & SimulStream® are registered trademarks of Osprey Video AG. All other trademarks are the property of their respective owners.
Product specifications and availability may change without notice <20161223
Clear Configuration
When this check box is selected, Talon will remove all encoder configurations from memory. You will not
be able to recover them.
Clear System
When this check box is selected, Talon will clear the encoder name and IP address from memory.
Selecting b
oth “Clear Configuration” and “Clear System” will clear all settings and restore Talon to its
factory state.
Set a Temporary IP
Usually a Talon on the network receives its IP address via DHCP. It is possible to assign a static address.
Occasionally, when a static address is used an error can occur whereby the address doesn’t match the
correct specification for that network. When the address is wrong, it is not possible to access the Web
GUI of the Talon. BOSS is still able to locate and identify a Talon with an unreachable IP address, but will
be unable to connect to the Web GUI. For that reason, BOSS includes a utility to assign a
temporary
address to allow access to the Web GUI.
To use this utility:

Click on the icon to the left of the Talon you need to change.

Select “Set IP” from the dialog box

In the “Set Device IP Address” dialog, enter valid IP information.
 Press “Locate Devices” to refresh BOSS

Access Talon by clicking on the name of the Talon you want to reach
IMPORTANT NOTE: The IP address that BOSS assigns is only for accessing the web GUI. Upon
successfully reaching the GUI, use the Talon’s IP configuration t o set it to DHCP or manually enter a valid
IP address. If you reboot Talon without first resetting its address in the web GUI you will return to the
situation where you started. You will once again have a Talon with an unreachable IP address.
Troubleshooting Note : BOSS will not locate Talon if:

Network Discovery is turned off on your Windows PC

Your Talon is not in the same network segment (VLAN/subnet) as your PC

Your network is firewall-protected. The UDP broadcast may not be permitted unless Port 10024
is open.
If you are unable to locate Talon, have your network administrator ensure it is on the same physical
and logical section of your network and that broadcast traffic is allowed on port 10024 with a
broadcast address of 224.0.0.212