manualshive.com logo in svg

OSI Systems Spacelabs Medical 92506, Operation Manual, Page: 43 / 92

Share
Download
OSI Systems Spacelabs Medical 92506 Operation Manual Download Page 43

 ABP Report Management System Operations Manual

5-3

Reviewing the Report

ABP Report Summary

Figure 5-2: ABP Report Summary

The 

ABP Report Summary

 displays a summary for the entire scan and for each of the statistical 

periods. The information provided is for the patient’s systolic, diastolic, MAP, pulse pressure, and 
heart rate. The low, high, and mean rates for the prescribed periods are also recorded.

This page also indicates the percentage of time that the readings in each of the periods were 
higher than the statistical boundaries.

Dipping is an indication of the change in blood pressure between day (or wake) and night (or 
sleep). It is the percentage change for the mean systolic and diastolic readings for the day and 
night. If there is no day or no night period, the dipping values cannot be calculated and, therefore, 
will not be available and will be indicated with a hyphen (-).

Click 

Next

 to continue to the next page.

Summary of Contents for Spacelabs Medical 92506





























































































Reviews:

No comments