manualshive.com logo in svg

OSI Systems Spacelabs Medical 92506, Operation Manual, Page: 31 / 92

Share
Download
OSI Systems Spacelabs Medical 92506 Operation Manual Download Page 31

 ABP Report Management System Operations Manual

3-3

Initializing the Monitor

Adding a Configuration

To add a new monitor initialization configuration:

1

Click 

New/Edit 

at the top of the 

Monitor Initialization Wizard 

dialog box (

Figure 3-3

). The 

Monitor Initialization List 

dialog box opens.

2

Type a name for the new configuration in the 

Item

 text box, and then click 

Add

.

3

Click 

Close

.

4

Select the desired monitor display settings (refer to 

 in 

Figure 3-3

).

•

Select the 

Show results of reading

 check box to display the reading results on the ABP 

monitor after each blood pressure reading.

•

Select the 

Clinical verification setup

 check box to detect blood pressure levels as low as 

40 mmHg (the cuff will always bleed to 40 mmHg).

•

Select the 

Display Cuff Pressure

 check box to display the cuff pressure on the ABP 

monitor while the cuff is pumping and bleeding.

•

The 

Monitor clock display time in

 options determine how the time appears on the ABP 

monitor: either in a 12-hour or 24-hour (military) format.

5

Configure the 

Wake periods

 and

 Sleep periods

 as necessary. The physician may require that 

the blood pressure readings occur more often during certain times of the day, and less often 
during other times of the day.

•

Make changes to 

Start Hour

 and 

Readings/Hour

 as desired.

•

If the 

Tone

 check box is selected, an audible tone will precede each blood pressure 

reading. (In most situations, ensure that 

Tone

 is not selected for sleep periods.) 

•

Once a period is defined, the pie chart on the right automatically updates to reflect the 
changes. Refer to 

Figure 3-3

.

•

The pie chart reflects the sleep and wake period settings with numbers (representing the 
readings per hour), asterisks ( 

*

 ; indicating that the tone is enabled), and colors (each 

period is color-coded to correspond with the clock display).

6

Click 

Next

 after completing the initialization settings.

Note:

The ABP Report Management System automatically saves your changes and updates global 
monitor initialization values to reflect the changes. 

7

Click the 

Initialize Monitor

 button to complete the initialization process (

Figure 3-4

).

Note:

•

If the monitor is not properly connected to the system, two error messages will appear. 
Click OK to close the messages, and properly connect the monitor to the system.

•

If the ABP Report Management System does not detect the monitor, it may be necessary 
to select the serial communications port for the monitor. Click the Select Com Port 

 

check box to activate the list. Select an item from the list, and click Initialize Monitor.

•

To initialize the monitor over the modem, select Modem under Select Communication 
Mode

.

8

Click 

Finish

 to return to the 

Main Menu

 when the system has finished initializing the monitor 

(indicated by a fully shaded progress bar).

Summary of Contents for Spacelabs Medical 92506





























































































Reviews:

No comments