Oshkosh IMT Tirehand TH10K135, Manual

Page: 10 / 110

8 TH10K135 Manual #99905540
General Specifications
GENERAL SPECIFICATIONS
TIREHAND MAXIMUM CAPACITY 10,000 lb (4536 kg)
BODY ROTATION 100° Cylinder Rotation
PAD ROTATION SYSTEM 360° Rotating Pads
TIREHAND WEIGHT (FORKLIFT MOUNTED) 8750 lb (3967 kg)
TIREHAND WEIGHT (LOADER MOUNTED) 9750 lb (4423 kg)
CLAMPING SPAN 52" to 135" (132.1 - 342.9 cm)
HORIZONTAL CENTER OF GRAVITY FROM
VEHICLE ATTACHMENT POINT
Forklift-mounted tirehand with 10,000 lb (4536 kg) tire &
rim assembly at 133" (337.8 cm)
clamp opening
70" (177.8 cm)
Loader-mounted tirehand with 10,000 lb (4536 kg) tire &
rim assembly at 133" (337.8 cm)
clamp opening 72" (182.9 cm)
METHOD OF CLAMPING Parallelogram
CLAMPING LOAD HOLDING VALVES Counterbalance valve
HYDRAULIC CONTROL VALVE Located on body assembly
HYDRAULIC CONTROLS 5-function remote control (radio or cab-mounted)
OPTIMUM PUMP CAPACITY (supplied from carrier
vehicle) 12 U.S. GPM (45.4 liters/min) @ 2500 - 3000 PSI (57
liters/min @ 172.4 bar)
COUNTERWEIGHT NEEDED As required for stabilization
STANDARD FEATURES

Hydraulic fallback protection

Rim flange hardware on pads

Forklift or loader mounting
OPTIONAL FEATURES

Electric controls

Lateral shifting capabilities
VEHICLE COMPATIBILITY
The Tirehand TH10K135 will permanently adapt to either a forklift truck or a front-end loader. When mounting to a
forklift truck, it is recommended that the truck be equipped with a sideshifter. If adapted to a front-end loader, quick
couplers are available which enable the disconnection of the Tirehand so that the original bucket can be quickly
coupled to the machine for normal operations.
IMT reserves the right to change specifications and design without notice. Where applicable, specifications are in
accordance with SAE standards and ISO/DIS 3691-1, the international standard for Industrial Trucks - Safety
Requirements and Verification.
IOWA MOLD TOOLING CO., INC.
BOX 189, GARNER, IA 50438-0189
TEL: 641-923-3711 FAX: 641-923-2424
Courtesy of Crane.Market