Installation and operating manual for Alarm-control.plus page
2 (10)
Table of contents
Configuration of the water sensors
............................................................................................... 9
General description
The electronic control system Alarm-Control.plus signals water leaks in the technical room of the
pool. The device can signal alarms optically and acoustically, two relay outputs and automatic e-
mail are also available. Alarm-Control.plus can work independently or as an extension unit for the
PC-45-exclusiv system.
Up to 6 water sensors can be connected to the Alarm-control.plus unit. Suitable sensors are pairs
of immersion electrodes or float switches.
A climate sensor can optionally be connected to the device, which enables the air temperature
and humidity in the technical room to be monitored. If a parameter exceeds the set limit values, an
alarm can be triggered.