Installation and operating manual for Alarm-control.plus page
5 (10)
Connection to the pool control PC-45 exclusiv
With the PC-45 exclusiv, several devices of the Plus series can be combined into a single network
cluster for pool management. Data is exchanged between devices via a local computer network
(LAN) and using its own communication protocol based on the UDP protocol.
To connect devices, both devices must be connected to the local network.
Connection to a “Smart-Touch” operating panel
To connect the devices with each other, both devices must be connected to the local network. On
the screen of the external Smart-
Touch control panel, go to the “Add OSF device” menu and
select
the “Alarm-control.plus” block. Then press the start button and then the LAN button in the
Alarm-control.plus according to the instructions displayed. For more information, see the
instructions for the external smart touch control panel.
Please also note the installation and operating instructions for the devices PC-45 exclusiv and
external smart touch control panel.
LAN cable
12V
