OSEE XCM-240, User Manual

Page: 60 / 74

Network Control
54
6.2 Menu Control
Open the management interface as shown in Figure 6.2-1, the menu items
listed in the left part are almost as the same as the main menu items.
Figure 6.2-1 Management Interface
As shown in Figure 6.2-1, the management interface is divided into the
following parts:
1.
Input Source Selection Button
It is used to selecting an input source as the input signal, such as: SDI1,
SDI2, LINE1, LINE2(CVBS), HDMI. The selecting box of "Apply to All"
at the right side is used to synchronize the settings for all the other kinds
of input sources.
2.
Navigation menu list
It shows the navigation menus: STATUS , ADJUST , VIDEO DISPLAY ,
INPUT SETUP , MARKER , AUDIO, DISPLAY , CLOSE CAPTION ,
CONFIG , COLOR TEMPERATURE , FUNCTION KEY , GPI , IMD and
SYSTEM . Click the navigation menu, it will show the corresponding
settings on the right side. The menu items in main menu on screen
display are mostly as the same as the menu items listed in navigation
menus except
SYSTEM , ADJUST and VIDEO DISPLAY .