OSEE XCM-240, User Manual

Page: 50 / 74

Functionality of the Main Menu
44
Items Default Value Domain Range Description
BLUE ONLY, MONO,
DELAY,
V DELAY, H/V
DELAY, SDI1, SDI2, LINE1,
LINE2,
HDMI, TALLY
GREEN, TALLY RED
GPI2 TALLY RED the same as GPI1 Set a function to GPI2
GPI3 UNDEF the same as GPI1 Set a function to GPI3
GPI4 UNDEF the same as GPI1 Set a function to GPI4
GPI5 UNDEF the same as GPI1 Set a function to GPI5
GPI6 UNDEF the same as GPI1 Set a function to GPI6
 Assign functions to GPI1~GPI6, some is level triggered, and some is edge
triggered, refer to Table 5.1-13 for the details.
 GPI control: when it changes it would be as a control value of response
control. If the level does not change, but there are other control caused by
changes in the control value, perform this change. When boot, detect the
GPI input status after initialization. If a GPI value is low, the monitor will
control the corresponding operation. The TALLY is directly control by the
level.
Table 5.1-13 The Description for GPI Items and Their Trigger
Items Function Trigger
AREA MARKER
Enable/Disable the display of
area marker.
Low: Enabled; High: Disabled
CENTER
MARKER Enable/Disable the display of
center marker.
Low: Enabled; High: Disabled
SAFETY
MARKER Enable/Disable the display of
safety marker.
Low: Enabled; High: Disabled
ASPECT Set the aspect ratio. Low: 16:9; High: 4:3
MONO
Switch between the
monochrome and color.
Low: MONO; High: NORMAL
OVER SCAN
Switch scan mode between
over and normal.
Low: OVER; High: NORMAL