OSEE XCM-240, User Manual

Page: 61 / 74

Network Control
55
3.
Parameter list
It shows the parameter names, values and operation buttons of the
selected navigation menu, as shown in the red rectangle in Figure 6.2-2.
The title in the yellow rectangle of the parameter list and the parameter
list will change with the navigation menu when switched.
Figure 6.2-2 Parameter List

There may be a “(S)” icon followed by some parameter name in the
parameter list, it is mean that this parameter is only a local parameter for
the current selected signal source, otherwise, the parameter is global and
the modification is valid for all signal sources.
 The
SET
button is used to confirm the modification of the parameter value.
6.2.1 ADJUST Menu
It will introduce ADJUST menu.
Click ADJUST button at the left navigation menu list, it will display the
adjust parameters, as shown in Figure 6.2-5: