OSEE LCM156-E, User Manual

Page: 43 / 85

Menu Operations
37
Items
Default
Value
Domain Range Description
ON.
WFM FORM
TYPE
OFF

MODE1: WAVE
FORM+ VECT75

MODE2: WAVE
FORM+ VECT100

VECT100

VECT75

WAVE FORM

OFF
Switch the display mode among
mode1,
mode2, vector100,
vector75 and wave form.
When the wave form is selected,
it will display the wave form, and
when the vector* is selected, it
will display the color component
of the image signal.
WFM
OVERLIMIT
100 50~100 Set the over limit of wave form.
WFM
UNDERLIMIT
0 0~50 Set the under limit of wave form.
WFM TRANS OPAQUE

OPAQUE

TRANS1: the
transparency is 25%

TRANS2: the
transparency is 50%
TRANS3: the
transparency is 75%
Set the transparency of the wave
form/vector
WFM
POSITION
LEFT

LEFT: Left bottom

RIGHT: Right bottom
Set the displayed position for
wave form/vector.
TIME CODE OFF

OFF

D-VITC

LTC

VITC
Set whether to display time code,
and set the time code display
mode.
STATUS INFORMATION
Set DISPLAY

STATUS DISPLAY item to be ON or Auto, it will display the Status
Information bar at the top left corner of the screen, and it displays the input channel
and signal format.
The status information will be displayed only 15 seconds, then it will be closed
automatically when STATUS INFORMATION item is set to be AUTO.
SDI1
1080I59.94
Source
Signal Format
The Signal Format usually displays as the following situations:

UNKNOWN : appears if an unsupported signal is input.

NO SIGNAL : appears if no signal is detected.