Stratford
Fireplace Installation and Operation Manual
84 __________________________________________________________________________
6.
Insert a cotter pin in the last
hole on the right side of the
tube. Then bend the tabs on
the pin to keep in place.
7.
Repeat
steps 4, 5
and
6
for
the two tubes in the back
then install the baffle. Then,
install the two front tubes.
8.
To remove the tubes use the
above steps in reverse order.
Note that
secondary air tubes can be replaced without removing the baffle board.
Important Notes:
The air tubes are identified for placement as follows:
Model
Type of tube
Stratford fireplace
Front
►
95 holes of 0.141"
Middle front
►
67 holes of 0.125’’
Middle rear
►
67 holes of 0.109’’
Rear
►
67 holes of 0.101’’
