Stratford
Fireplace Installation and Operation Manual
32 __________________________________________________________________________
PART B – INSTALLATION
Install the fireplace only as described in these instructions and using only components from the chimney
manufacturers listed in table 2.
Parts Required
•
Stratford Fireplace
•
Insulated chimney made by the manufacturers listed in table 2, with the corresponding specifications:
−
Chimney lengths
−
Elbows (where necessary)
−
Associated components as per these installation instructions
Additional Equipment (optional)
•
Forced air distribution kit
•
Hot air gravity distribution kit
•
Fresh air intake kit
•
Fire screen
SUMMARY OF INSTALLATION CAUTIONS AND WARNINGS
•
THE INFORMATION GIVEN ON THE CERTIFICATION LABEL AFFIXED TO THE APPLIANCE ALWAYS
OVERRIDES THE INFORMATION PUBLISHED, IN ANY OTHER MEDIA (OWNER’S MANUAL,
CATALOGUES, FLYERS, MAGAZINES AND/OR WEB SITES).
•
MIXING OF APPLIANCE COMPONENTS FROM DIFFERENT SOURCES OR MODIFYING COMPONENTS
MAY RESULT IN HAZARDOUS CONDTIONS. WHERE ANY SUCH CHANGES ARE PLANNED, STOVE
BUILDER INTERNATIONAL INC. SHOULD BE CONTACTED IN ADVANCE.
•
ANY MODIFICATION OF THE APPLIANCE THAT HAS NOT BEEN APPROVED IN WRITING BY THE TESTING
AUTHORITY VIOLATES CSA B365 (CANADA), AND ANSI NFPA 211 (USA).
•
CONNECTION BETWEEN A 2100 INSULATED CHIMNEY AND A LISTED STAINLESS STEEL CHIMNEY LINER
IS ALLOWED IF A LISTED CONNECTOR IS USED. FOLLOW INSTRUCTIONS IN SECTION 9.9 FOR THAT
KIND OF INSTALLATION.
•
IF REQUIRED, A SUPPLY OF COMBUSTION AIR SHALL BE PROVIDED TO THE ROOM.
•
DO NOT CONNECT TO OR USE IN CONJUNCTION WITH ANY AIR
DISTRIBUTION DUCTWORK UNLESS SPECIFICALLY APPROVED FOR SUCH
INSTALLATION.
•
DO NOT CONNECT THIS UNIT TO A CHIMNEY FLUE SERVING ANOTHER
APPLIANCE.
•
THIS FIREPLACE HAS NOT BEEN TESTED TO BE INSTALLED IN A MOBILE
HOME.
•
THIS FIREPLACE HAS NOT BEEN TESTED TO BE INSTALLED INSIDE A
MASONRY CHIMNEY.
