ORTNER SE11 56/56/42, Assembly Instructions Manual

Page: 5 / 19

4
ORTNER GmbH | Hürmer Straße 36 in A-3382 Loosdorf | Tel +43 2754 2707 | Fax +43 2754 2708
office@ortner-cc.at | www.ortner-cc.at
Important information before the installation

Check the rotary air damper (the locking plate must be removed in the event of manual
operation) in regard to its function and ease of operation. Check all screws on the frame and
retighten, if necessary.

Shell components (red) must always be made gastight with Ortner bedding mortar HK.

Depending on the specific burn-out situation, certain shell components must be cut to length
accordingly.

Refractory concrete parts (grey) are always installed dry (no bonding). In this manner, they can always be
replaced via the door.

All grey refractory concrete parts have already been cut to the correct dimensions.
!
!