13
ORTNER GmbH | Hürmer Straße 36 in A-3382 Loosdorf | Tel +43 2754 2707 | Fax +43 2754 2708
[email protected] | www.ortner-cc.at
General information
Neither combustible nor explosive substances may be located in the installation space of the stove.
The SE11 56/56/42 may not be installed in spaces with insufficient combustion air supply. (CAUTION: Please
note that newly constructed or renovated buildings can be very airtight and as a result, a sufficient
combustion air supply may not be possible without additional equipment.) A sufficient dimensioning of the
supply lines must be ensured in the event of external combustion air supply.
Calculation required.
Air grates for the combustion air supply must be arranged in such a manner that they cannot be easily
blocked off.
The SE11 56/56/42 may not be operated in installation spaces that are ventilated by means of fans in
ventilation or heating air systems with the exception that the safe operation of the stove can be ensured.
This means:
-
A simultaneous operation of an air extraction system and the firing installation must be prevented.
-
The negative pressure in the installation space must be prevented automatically and reliably by
means of corresponding safety equipment
-
Overall, the negative pressure generated as a result of the combustion air flow of the tiled stove
heating operation and the volume flows of the ventilation systems in the installation space and the
rooms connected via the ventilation system may not exceed a value of 4 Pa. This must also be
ensured in the event of the adjustment or removal of easily accessible control devices of the
ventilation system (external air connection required).
-
The system may only circulate the air within a room.
No combustible objects may be located at a distance of 80 cm to the firebox door (radiation range).
Attention must be paid in regard to the installation surface that no combustible materials are located to the
side or behind the stove at a distance of 20 cm. Additionally, the ground must have sufficient loading capacity
and must be incombustible.
The installation of firing installations is only permitted at those locations in which a sufficient loading capacity
of the installation surface is ensured and the installation surface may not be combustible. Should this not be
the case, then additional measures must be taken to achieve this (e.g. incombustible board for the
distribution of the load).
In regard to the covering of the stove, attention must be paid that corresponding cleaning openings are
provided. The regular cleaning of the chimney may only be performed by a licensed specialist.
Furthermore, attention must be paid during the construction of the covering that components such as the
control, temperature sensor, air damper and actuator are accessible at all times. The wiring of the door
contact switch and temperature sensor must be implemented in a removable manner.
This firing installation is suitable for multiple connections to the chimney, however, the self-closing function
of the firebox door must be active (springs in the door frame must be tensioned).
The construction and dimensions of the ceramic hot gas flue may be designed in an individual manner.
The design of the ceramic hot gas flues must be performed for the Ortner KMS using the Ortner calculation
programme (storage mass of the ceramic hot gas flue approx. 520 kg, will significantly affect the assembly
situation), and for the construction of chamotte flues in accordance with the technical directive on stove and
air heating construction (applies to Germany) or the tiled stove calculation programme (EN 15544).
CAUTION: The ceramic disc can fracture during operation due to a mechanical overload, this will result in
sharp parts (risk of injury).
