ORTECO IIa Series, Use And Maintenance Manual

Page: 74 / 114

68
English language Use and maintenance
INFORMATION FOR REPLACEMENTS
9
4) Gently move the lever (D) and carefully lift the percussion hammer. The components
(C, E, F) will remain on the resting surface.
Danger - Warning
Pay particular attention to the component (F) which could fall and injure the opera-
tor.
5) Accurately clean the surfaces of the components removed.
6) Position the component (C), the new stroke plate (E) and the component (F) on the
resting surface.
7) Grease the components (E) and (F).
8) Gently move the lever (D) and carefully lower the percussion hammer.
9) Fit the screws (B) and tighten the nuts (A).
10) Fit the guide plate (H).
11) Replace the matrix (G) with the stroke plate.
Scrapping the machine
Scrapping operations must be handled by specialised personnel with suitable skills for the
job.
The components removed must be sorted according to the type of materials they con-
tain and in compliance with the laws in force concerning “waste collection, sorting and
disposal”.
With reference to WEEE directives (Waste from Electrical and Electronic Equipment), the
electric and electronic parts, marked with the relative symbol, must be disposed of via spe-
cific authorised collection centres.