ORTECO IIa Series, Use And Maintenance Manual

Page: 51 / 114

45
English language Use and maintenance
INFORMATION FOR USE
6
Counter-rotation of the tool
- If the counter-rotation tool is foreseen, move the lever to position (V2) to activate the
rotation in the opposite direction to the hole making direction.
Counter-rotation is mainly used to unblock the tool from the hole.
- After having unblocked the tool, move lever (V) to the disabled position (V0) to stop the
counter-rotation.
- Move the lever (R) to position (R1) to remove the tool from the hole.
Information
To automatically stop the tool at the required depth, see the “Adjusting of PROXIMITY
device that stops the hammer’s down stroke” section.
If the machine is fitted with the laser device see the “Adjusting the laser device that
stops the hammer’s down stroke” section.