ORTECO IIa Series, Use And Maintenance Manual

Page: 15 / 114

9
English language Use and maintenance
TECHNICAL INFORMATION
2
6) Carefully read the instruction manual before operating the machine.
7) Attachment points of lifting hooks.
8) Operators and site assistants must keep a safe distance from the machine.
9) Greasing points.
10) Type of oil used for the hydraulic system.
11) Type of engine fuel.
12) Before starting the engine check that the emergency button is not pressed down.
14) This shows the operating noise level emitted by the machine.
15) General hazard.
16) This shows the direction of movement and the relevant manoeuvres of the shifting
control levers.
17) This shows the direction of movement of the accelerator lever to increase or decrease
the number of revolutions of the engine.
18) This specifies the type of engine oil used.
19) This shows the fuel supply open / close turn valve.
20) This shows the battery cut-off device.
21) This shows the direction of movement and the relevant manoeuvres of the pile driver
control levers.
22) This shows the connection of the high pressure delivery hose.
23) This shows the connection of the low pressure draining hose.
Technical characteristics
(**) For the technical characteristics of the engine see the engine manual enclosed.
Percussion hammer model
SMART 600J SMART 800J
Engine (**) (**)
Percussion hammer power joule 590 830
Strikes per minute n° min 650 ÷ 1000 680 ÷ 720
Working pressure Mpa 15
Required oil flow l/min 75
Hydraulic oil tank capacity l 110
Fuel tank capacity l 50
Electrical system voltage V dc 12
Maximum longitudinal slope degrees 8
Maximum transversal slope degrees 8
Maximum wading depth mm 430
Maximum speed Km/h 2,1
Maximum towable load kg 1000
Stroke plate weight kg 25
Crawler weight (without accessories) kg 1750
Pile-driver weight (without accessories) kg 1100 1250
Overall weight of machine (tracked truck and pile driver)
(without accessories)
kg 2850 3000