ORTECO IIa Series, Use And Maintenance Manual

Page: 65 / 114

UN21-0182EI
B A
59
English language Use and maintenance
MAINTENANCE INFORMATION
7
Track gearmotor oil level check
Proceed as outlined below.
1) Stop the machine on flat ground with caps (A) and (B) arranged as shown in the figure.
2) Remove the ignition key and store it safely.
3) Unscrew a cap (A - B) and check that the oil is level with the bottom edge of the hole.
4) If necessary, top up the oil to the correct level from the same hole.
5) After topping up, screw the cap back on.
For oil characteristics see the “Lubricant comparison table”.
Hose check
Check the seam fastening the fitting to the hose and the condition of the hose.
If the hose shows signs of ageing, breakages, swellings, abrasions, etc., it must be re-
placed.