ORTEC Micro-Detective-HX, Operation Manual

Page: 70 / 96

ORTEC Micro-Detective
®
-HX Human Portable Radiation Detection System — Operation Manual
60
!
If the internal battery does not hold a charge, ensure it is properly installed. If properly
installed, the battery must be replaced according to the instructions in Section A.7.
!
If the HX still does not turn on, contact your ORTEC representative or our Global Service
Center.
8.4. If You Forgot the Password
The default password is
1122
. There is no master password. If you change the default password
and lose your new entry, the HX unit must be returned to the factory. Contact your ORTEC
representative or our Global Service Center for assistance.
8.5. If GammaVision Cannot “Find” the HX
(HPRDS-Qualified Unit Only)
If properly installed and functioning GammaVision software cannot find and communicate with
the HX:
!
Make sure the HX is in External mode (Section A.1).
!
Make sure the USB cable is functional and is correctly connected to the PC.
!
If connected via a USB hub, make sure the hub is correctly connected and functioning.
!
Check the Master Instrument List within GammaVision to ensure that the HX is on the list. If
it is not listed, run the MCB Configuration program as described in the GammaVision User’s
Manual.
8.6. If The Error (Amber) LED Lights
There are no user-serviceable parts inside the HX main enclosure. If a mechanical or electronic
component fails, the unit must be returned to the factory.
8.6.1. HX Error Messages
Error Message Meaning Action
Dose Rate Limit Exceeded (as stated) Move HX away from source and continue
measurement.