ORTEC Micro-Detective-HX, Operation Manual

Page: 40 / 96

ORTEC Micro-Detective
®
-HX Human Portable Radiation Detection System — Operation Manual
30
Zooming In — When you zoom in, the new screen centers on the current position of the marker
line. Therefore, the fastest way to zoom in on a specific channel is to tap as close as possible to
that channel first, then tap the zoom-in (< >) button as needed until the channels are separated
well enough that you can tap on the specific channel.
Displaying Simplified or Detailed Hardware Status
The Status screen (Section 3.3.3) can be configured to show either the actual parameter readings
or
OK/ERR
. To view the actual readings, go to the Options menu and make sure the Details item
is check-marked. To view only the
OK/ERR
indicators, unmark Details. Figure 19 on page 23
shows the detailed status screen.
Displaying/Hiding Alarm Color on the Screens
The Show Colors option allows you to show/hide the display of alarm colors in the top and
bottom sections of the screen (see the comparison in Fig. 27). When Show Colors is off (with no
checkmark displayed beside it on the Options menu; the factory default setting), only the IDs in
the center section of the screen display the alarm color.
Displaying/Hiding Alarms on the Home Screen
Marking the Suppress IDs option silences (hides) the Home screen’s “passive” radiation
monitoring display. This is the factory default setting. The HX continues to monitor and analyze
Fig. 27. Comparison of Alarm Condition with “Show Colors” Option
OFF and ON.