© Copyright Qvis ®. All documentation rights reserved.
18
2.1.6 Alarm Output (only available on certain NVR models)
To manage the alarm output parameters and to check the current alarm setup state for
the NVR, click the right mouse button on the real time monitoring screen and select
‘Alarm Ouput’ from the options list.
The window that appears is shown below:
【
Channels
】
The number of channels that are set to send out an alarm signal.
【
Schedule
】
Shows which channels have been scheduled to set an alarm trigger.
【
Manual
】
Shows which channels have the Alarm outputs on/status is active.
【
Stop
】
Shows which channels have the Alarm outputs off/status is inactive.
【
Status
】
The current status of alarm output.
Notice:
Some models don’t have the local alarm, please refer to the products
descriptions.
2.1.7 NET Channel State
To view the status of all the cameras connected to the network, click the right mouse
button on the real time monitoring screen and select ‘NET Channel State’ from the
options list.
