© Copyright Qvis ®. All documentation rights reserved.
15
2.1.2.1 PTZ configuration
The direction of the PTZ camera, steps, zoom, focusing, iris, preset points, cruising
between points, patrols, sweeping the boundary, calling an auxiliary switch, light switch,
horizontal rotation are controlled using the directional arrow keys.
The [Step] is mainly used to control directions. The figure can be set from 1 to 8.
Directly click or to adjust the zoom, sharpness and brightness.
PTZ supports eight directions.
2.1.2.2 Quick location
Quick location: <SIT> is in the middle of the direction arrows, shown in the red circle
below:
Make sure that the
PTZ’s protocols support this function. The PTZ will turn to the
clicked point and move it to the centre of screen. It also supports zooming into and out
of the video image. Drag the mouse in the quick location page to zoom into an area of
the footage. The dragged box can zoom in to the image in between 4 to 16 times. Hold
the mouse and drag it up to complete zoom of the box. Drag it down to narrow the box.
2.1.3 Color setting
