MiPNet22.11
O2k-FluoRespirometer manual
12
Oroboros Instruments
Mitochondria and Cell Research
6.5.
O2k-signal line
O2 signals pX signals User
Power-O2k number Time [s] Fluo/Amp DatLab O2k Serial
signals version number
Peltier power [%]
Barom. pressure [kPa]
Temp [°C]
Time [s]
Time of the experiment since connecting, displayed on the
X
-axis as [h:min] or [h:min:s].
O2(A) [V] and O2(B) [V]
Oxygen raw signal of chamber (A) and (B),
which is converted to oxygen concentration by calibration,
as displayed in the plot O2 concentration.
If the oxygen signal displays 9.99 V, the amplifier has
reached saturation. If the signal remains at 9.99 V, press
F7 and set the gain to 1. L
Send to activate the gain
setting and to obtain a signal <10 V.
Temp. [°C]
Block temperature, continuously recorded.
Barom. pressure [kPa]
Barometric pressure, continuously recorded.
Peltier power [%]
Operative Peltier power applied for temperature
regulation of the O2k-block, continuously recorded.
Amp (A) and Amp (B) [V]
Amperometric signal from amperometric
sensors (Fluo, NO or other)
after current [Amp] to voltage
[V] conversion, chamber (A) and (B).
pX(A) and pX(B) [V]
Potentiometric raw signal of ion sensitive
electrodes for chamber (A) and (B).
Env Temp [°C]
Signal from internal temperature sensor recording the
environmental (room) temperature.
Ext Temp [°C]
Signal from external PT1000 temperature sensor
(optional). "50.000" is shown if no sensor is connected.
User name
The username which was entered in the first window is
shown on the right side of the O2k-signal line (next to
the DatLab version).
6.6.
O2k-status line
#A
and
#B
The labels of the left and right chamber, where #
represents the Power-O2k number (P#), chosen in the
POS (A)
Set temp. [°C] TIP connected
Error POS(B)
#A Amp(A) pX(A) Chamber Illum. on/off on/off pX(B) Amp(B) #B
O2k status line
O2k signal line
Summary of Contents for O2k-FluoRespirometer
Page 16: ......
