14
User manual
UM0972260 A 07
show the camera in a Normal, Mirrored, Flipped or
Mirrored and Flipped way. This setting will override
the current EMOS camera setting.
The fields
Command IP
must be the same as in the
Camera config for ‘Connection, Camera IP’,
Com-
mand Port
must be the same as in the Camera
config for ‘Connection, Camera Port’ and must be
in the 192.168.40.xx subnet and
Video Port
must
be the same as in the Camera config for ‘Stream,
Stream Port’.
Remark:
In this menu when a field is changed,
use the Next button on the on-screen keyboard
until Done is tapped, then the OK button must be
tapped to store the values.
Camera presets
, these settings, see figure 48, de-
pend on the View Mode setting. When View Mode
is set to Single camera, the Single camera preset
selects which camera and how it is presented. All
other Camera presets are valid when View Mode
is set to Vehicle Direction. Note that for Vehicle
Direction mode, the Vehicle settings WISR portal
must also be enabled. This presets feature is dis-
abled in model number 0300150 (WISR LR) and
also when in model 0300100 (WISR) the HD-E/
AFZ or HD-E/PTZ camera is used.
Streams
, these settings are for ‘tweaking’ the sys-
tem, normally you should leave them in the default
configuration.
Adaptive streaming, when set to ON the effect
of dropped frames due to the WiFi is much less
noticeable.
General frame rate, the system will try to send
frames at the desired framerate. Setting this to a
lower FPS decreases the data throughput and can
have effect on the distance between WISRs and tablet.
Stream frame injection, normally not used.
Stream bitrate scale, used to minimize network traffic, select 25%, 50%, 75% or 100% of the bitrate the
system chooses. The 100% bitrate will be 50 Mbps for full screen (large), 20 Mbps for 2 streams on the
screen (medium) and 13 Mbps for a quad screen view (small).
NB. The total bitrate of all streaming cameras must not exceed 50 Mbps.
PTZ,
the Zooming speed (Zoom part of HD-E/AFZ or HD-E/PTZ) and Moving speed (Pan and Tilt part of
HD-E/PTZ) are default set to 75%. This can be adjusted to 25%, 50%, 75% and 100%.
Figure 48
