PROFESSIONAL
SuRvEILLANcE SYSTEM
20
four channel digital video recorder
SC144
27 system > tour
Tour menu allows the configuration of tour function.
Tour function switches the view mode on live monitoring screen
automatically.
›
enable Tour:
Enable the touring function. The DVR will
display the channels by cycling through all the enabled
channels.
›
inTerVal:
This determines the duration the display dwells
on current view channels (5-120 seconds).
›
VieW:
Select the channels to be included in the tour display.
›
alarM Tour Type:
Alarm Tour is used in conjunction with
the alarm functionality. When an alarm is triggered, the DVR
will display single-view of the channel that triggered the
alarm.
›
inTerVal:
This determines the duration the display dwells
on the alarm triggered channel.
›
reTurn aFTer FinisheD:
Check to resume normal touring
after the alarm tour interval expires.
When tour function is enabled, the following icon will be
displayed on the main monitoring screen. Press the icon to
toggle on and off the tour function.
28 system > cHannel tyPe
Channel Type allows the setting of resolution of all channels.
It is recommended to select the first setting. This setting enables
the DVR to operate at highest recording resolution for all channels.
29 adVanced > Hdd manage
HDD manage allows the management of internal DVR hard
drive storage space.
The table displays the hard drive type, maximum capacity of
the hard drive, remaining storage space and status. Note that
externally connected storage device like USB flash drives and
external hard drives are not displayed here.
›
hDD no:
Number allocated to the hard drive.
›
Type:
Hard drive operating mode.
>
reaD:
Reading hard drive is allowed. Writing to the hard
drive is restricted.
>
reaD/WriTe:
Reading and writing to hard drive are
allowed.
>
reDunDanT:
Backup recording files are stored in this
hard drive.
›
sTaTus:
Status of the hard drive.
>
norMal:
Hard drive is operating normally.
>
error:
Hard drive is faulty.
>
Free:
Hard drive is not in use.
>
in use:
DVR currently recording into the hard drive.
›
Disk space:
Maximum hard drive storage space.
›
reaD/WriTe:
Set hard drive to read/write.
›
reaD:
Set hard drive to read only.
›
reDunDanT:
Set hard drive to store redundant recording
files.
›
ForMaT Disk:
Remove all data from hard drive. If a new
hard drive is installed in the DVR, select the new drive and
click format to enable hard drive usage.
›
recoVer:
Resume normal hard drive operation.
›
parTiTion:
Set hard drive partition between video files
and image files.
