Orion PARSEC 10100C Manual Download Page 23

44

One-Year limited Warranty

This Orion Parsec Astronomical Imaging Camera is warranted against defects in 
materials or workmanship for a period of one year from the date of purchase. This 
warranty is for the benefit of the original retail purchaser only. During this warranty 
period Orion Telescopes & Binoculars will repair or replace, at Orion’s option, any 
warranted instrument that proves to be defective, provided it is returned postage paid 
to: Orion Warranty Repair, 89 Hangar Way, Watsonville, CA 95076. If the product is 
not registered, proof of purchase (such as a copy of the original invoice) is required.
This warranty does not apply if, in Orion’s judgment, the instrument has been abused, 
mishandled, or modified, nor does it apply to normal wear and tear. This warranty 
gives you specific legal rights, and you may also have other rights, which vary from 
state to state. For further warranty service information, contact: Customer Service 
Department, Orion Telescopes & Binoculars, 89 Hangar Way, Watsonville, CA 95076; 
(800) 676-1343.

Orion telescopes & Binoculars

Oriontelescopes.com

89 Hangar Way, Watsonville, CA 95076

Customer Support Help line (800) 676-1343

© 2008-2011 Orion Telescopes & Binoculars

This device complies with Part 15 of the FCC Rules. Operation is subject to the following 
two conditions: (1) this device may not cause harmful interference, and (2) this device must 
accept any interference received, including interference that may cause undesired  operation.

Changes of modifications not expressly approved by the party responsible for compliance 
could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital 
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reason-
able protection against harmful interference in a residential installation. This equipment 
generates, uses and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. 
However, there is no guarantee that interference will not occur in a particular installation. If 
this equipment does cause harmful interference to radio or television reception, which can 
be determined by turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an output on a circuit different from that to which the receiver 
in connected.

Consult the dealer or an experienced radio/TV technician for help.

A shielded cable must be used when connecting a peripheral to the serial ports.

Summary of Contents for PARSEC 10100C
























Reviews: