FIGHT TECH BY ORION
6
•
Please be sure to inspect unit for all listed materials before proceeding with assembly.
•
Unit must be properly secured to the floor.
•
Use equipment at your own risk, and always consult a physician before starting any new
exercise.
•
KEEP OTHERS AWAY DURING ASSEMBLY UNLESS HELP IS NEEDED FOR LIFTING COMPONENTS.
Assembly of Unit
Place the strips of the floor
fastener onto the base. Spread
out as shown in picture above.
Peel back the adhesive strip from
the fastener and discard. Then
place the unit in the desired
location on the floor.
FLOOR
MUST BE CLEAN, DRY, AND LEVEL
.
Step on the unit to seat the
fastener into place. Tool will be
required for removal after
fastener is locked in, such as a flat
head screwdriver
Gently twist shaft into the
center hole. Do NOT force straight
down. Secure the base using (3)
set screws and tighten down using
the 1/8 allen wrench provided. Do
NOT over tighten.
Place the foam spacer over the
shaft as shown.
Place the middle target (item 5)
where desired (recommended to
set around waist height) and
tighten (2) set screws using the
provided 1/8” allen wrench.
1
2
3
4
5
6
