TGPS-9164GT-M12 Series User
Manual
ORing Industrial Networking Corp
15
#6
BI_DA+ with PoE Vout+
#7
BI_DC-
#8
BI_DB- with PoE Vout-
The device supports auto MDI/MDI-X operation. You can use a cable to connect the switch to a
PC. The table below shows the 10/100Base-T(X) MDI and MDI-X port pin outs.
10/100 Base-T(X) MDI/MDI-X Pin Assignments:
Pin Number
MDI port
MDI-X port
1
TD+(transmit)
RD+(receive)
2
TD-(transmit)
RD-(receive)
3
RD+(receive)
TD+(transmit)
4
Not used
Not used
5
Not used
Not used
6
RD-(receive)
TD-(transmit)
7
Not used
Not used
8
Not used
Not used
1000Base-T MDI/MDI-X Pin Assignments:
Pin Number
MDI port
MDI-X port
1
BI_DA+
BI_DB+
2
BI_DA-
BI_DB-
3
BI_DB+
BI_DA+
4
BI_DC+
BI_DD+
5
BI_DC-
BI_DD-
6
BI_DB-
BI_DA-
7
BI_DD+
BI_DC+
8
BI_DD-
BI_DC-
Note:
“+” and “-” signs represent the polarity of the wires that make up each wire pair.
Console port wiring
The switch has one RS-232 (M12 5pin) console port, located on the front panel. Use a
M12-to-DB9 console cable to connect the console port to your PC's COM port.
