TGPS-9164GT-M12 Series User
Manual
ORing Industrial Networking Corp
41
Label
Description
DHCP Client
Enable the DHCP client by checking this box. If DHCP fails or the
configured IP address is zero, DHCP will retry. If DHCP retry fails,
DHCP will stop trying and the configured IP settings will be used.
IP Address
Assigns the IP address of the network in use. If DHCP client
function is enabled, you do not need to assign the IP address.
The network DHCP server will assign an IP address to the switch
and it will be displayed in this column. The default IP is
192.168.10.1
.
IP Mask
Assigns the subnet mask of the IP address. If DHCP client
function is enabled, you do not need to assign the subnet mask.
IP Router
Assigns the network gateway for the switch. The default gateway
is
192.168.10.254
.
VLAN ID
Provides the managed VLAN ID. The allowed range is 1 through
4095.
DNS Server
Enter the IP address of the DNS server in dotted decimal notation.
Save
Click to save changes
Reset
Click to undo any changes made locally and revert to previously
saved values
5.1.5 IPv6 Settings
IPv6 is the next-generation IP that uses a 128-bit address standard. It is developed to
supplement, and eventually replace the IPv4 protocol. You can configure IPv6 information of
the switch on the following page.