ORiNG TGPS-9164GT-M12 User Manual Download Page 60

Page: 60 / 181

TGPS-9164GT-M12 Series User

Manual

ORing Industrial Networking Corp

LACP Status

This page provides an overview of the LACP status for all ports.

Label

Description

Port

Switch port number

LACP

Yes

means LACP is enabled and the port link is up.

means

LACP is not enabled or the port link is down.

Backup

means the

port cannot join in the aggregation group unless other ports are

removed. The LACP status is disabled.

Key

The key assigned to the port. Only ports with the same key can be

aggregated

Aggr ID

The aggregation ID assigned to the aggregation group

Partner System ID

The partner

‟s system ID (MAC address)

Partner Port

The partner

‟s port number associated with the port

Refresh

Click to refresh the page immediately

Auto-refresh

Check to enable an automatic refresh of the page at regular

intervals

Summary of Contents for TGPS-9164GT-M12






















































































































































































Search results

Summary of Contents for TGPS-9164GT-M12

Reviews:

Related manuals for TGPS-9164GT-M12

Brands by name

Popular brands

ORiNG TGPS-9164GT-M12, User Manual

Search results

Summary of Contents for TGPS-9164GT-M12

Reviews:

Related manuals for TGPS-9164GT-M12

Brands by name

Popular brands