TES-3080-M12(-BP2) User Manual
ORing Industrial Networking Corp
94
no accounting
I
Clear interface
accounting
information
switch(config)#interface
fastEthernet 2
switch(config-if)#no accounting
6.3 Commands Set List—Trunk command set
TPS-3082GT-BP1
Commands
Level Description
Example
aggregator priority
[1to65535]
G
Set port group system
priority
switch(config)#aggregator priority 22
aggregator activityport
[Port Numbers]
G
Set activity port
switch(config)#aggregator
activityport 2
aggregator group
[GroupID] [Port-list]
lacp
workp
[Workport]
G
Assign a trunk group
with LACP active.
[GroupID] :1to3
[Port-list]:Member port
list, This parameter
could be a port
range(ex.1-4) or a port
list separate by a
comma(ex.2, 3, 6)
[Workport]: The
amount of work ports,
this value could not be
less than zero or be
large than the amount
of member ports.
switch(config)#aggregator group 1
1-4 lacp workp 2
or
switch(config)#aggregator group 2
1,4,3 lacp workp 3
aggregator group
[GroupID] [Port-list]
nolacp
G
Assign a static trunk
group.
[GroupID] :1to3
[Port-list]:Member port
list, This parameter
could be a port
range(ex.1-4) or a port
list separate by a
comma(ex.2, 3, 6)
switch(config)#aggregator group 1
2-4 nolacp
or
switch(config)#aggreator group 1
3,1,2 nolacp
show aggregator
P
Show the information
of trunk group
switch#show aggregator
