TES-3080-M12(-BP2) User Manual
ORing Industrial Networking Corp
30
Configuration Name
The name which identifies the VLAN to MSTI mapping. Bridges
must share the name and revision (see below), as well as the
VLAN-to-MSTI mapping configurations in order to share spanning
trees for MSTIs (intra-region). The name should not exceed 32
characters.
Revision Level
(0-65535)
Revision of the MSTI configuration named above. This must be an
integer between 0 and 65535.
Priority (0-61440)
A value used to identify the root bridge. The bridge with the lowest
value has the highest priority and is selected as the root. If the
value changes, you must reboot the switch. The value must be a
multiple of 4096 according to the protocol standard rule.
Max Age Time(6-40)
The number of seconds a bridge waits without receiving
Spanning-tree Protocol configuration messages before attempting
a reconfiguration. The valid value is between 6 through 40.
Hello Time (1-10)
The time interval a switch sends out the BPDU packet to check
RSTP current status. The time is measured in seconds and the
valid value is between 1 through 10.
Forwarding Delay
Time (4-30)
The time of a port waits before changing from RSTP learning and
listening states to forwarding state. The valid value is between 4
through 30.
Max Hops (1-40)
An additional parameter for those specified for RSTP. A single
value applies to all STP within an MST region (the CIST and all
MSTIs) for which the bridge is the regional root.
Apply
Click to apply the configurations.
