RES-P3242GCL SERIES User’s Manual
59
System Warning – Event Selection
SYSLOG and SMTP are the two warning methods that supported by the system. Check
the corresponding box to enable system event warning method you wish to choose. Please
note that the checkbox can not be checked when SYSLOG or SMTP is disabled.
System Warning – Event Selection interface
The following table describes the labels in this screen.
Label
Description
Device cold start
When the device
executes
cold start, the system will issue a
log event.
Device warm start
When the device executes warm start, the system will issue a
log event.
Authentication Failure
Alert when SNMP authentication failure.
O-Ring topology change
Alert when O-Ring topology changes.
Port Event
Disable
Link Up
Link Down
Link Up & Link Down
Apply
Click “
Apply
” to set the configurations.
