ORiNG RES-P3242GCL SERIES User Manual Download Page 33

Page: 33 / 101

RES-P3242GCL SERIES User’s Manual

be connected to exactly one other bridge (i.e. It is served by a

point-to-point LAN segment), or it can be connected to two or

more bridges (i.e. It is served by a shared medium LAN segment).

This function allows the P2P status of the link to be manipulated

administratively. True means P2P enabling. False means P2P

disabling.

Admin Edge

Label

Admin Non STP

Label

Apply

Click “

Apply

” to activate the configurations.

MSTP Instance interface

Label

Description

Instance

Set the instance from 1 to 15

State

Enable or disable the instance

VLANs

Set which VLAN will belong which instance

Proprietary (0-61440)

A value used to identify the root bridge. The bridge with the

lowest value has the highest priority and is selected as the root.

If the value changes, You must reboot the switch. The value

must be multiple of 4096 according to the protocol standard rule.

Apply

Click “

Apply

” to activate the configurations.

Summary of Contents for RES-P3242GCL SERIES






































































































Search results

Summary of Contents for RES-P3242GCL SERIES

Reviews:

Related manuals for RES-P3242GCL SERIES

Brands by name

Popular brands

ORiNG RES-P3242GCL SERIES, User Manual

Search results

Summary of Contents for RES-P3242GCL SERIES

Reviews:

Related manuals for RES-P3242GCL SERIES

Brands by name

Popular brands