RES-P3242GCL SERIES User’s Manual
33
4.1.6.5 Port Trunk
Port Trunk – Setting
You can select static trunk or 802.3ad LACP to combine several physical links with a logical
link to increase the bandwidth.
Port Trunk - Setting interface
The following table describes the labels in this screen.
Label
Description
System Priority
A value used to identify the active LACP. The switch with the
lowest value has the highest priority and is selected as the
active LACP.
Group ID
There are three trunk groups to provide configure. Choose
the "
Group ID
" and click
Select
.
LACP
If enable, the group is LACP static trunk group. If disable, the
group is local static trunk group. All ports support LACP
dynamic trunk group. If connecting to the device that also
supports LACP, the LACP dynamic trunk group will be created
automatically.
Work ports
Allow maximum four ports to be aggregated at the same time.
With LACP static trunk group, the exceed ports are standby