RES-P3242GCL SERIES User’s Manual
10
Confirm
password
Re-type the new password.
Apply
Click “
Apply
” to set the configurations.
4.1.3.3 IP Setting
You can configure the IP Settings and DHCP client function through IP configuration.
IP Configuration interface
The following table describes the labels in this screen.
Label
Description
DHCP Client
To enable or disable the DHCP client function. When DHCP client
function is enabling, the switch will be assigned the IP address from
the network DHCP server. The default IP address will be replaced by
the IP address which the DHCP server has assigned. After clicking
“
Apply
” button, a popup dialog shows up to inform when the DHCP
client is enabling. The current IP will lose and you should find a new
IP on the DHCP server.
IP Address
Assign the IP address that the network is using. If DHCP client
function is enabling, you do not need to assign the IP address. The
network DHCP server will assign the IP address for the switch and it
will be display in this column. The default IP is 192.168.10.1
Subnet Mask
Assign the subnet mask of the IP address. If DHCP client function is
enabling, you do not need to assign the subnet mask
Gateway
Assign the network gateway for the switch. The default gateway is
