IDS-5012 Series
User’s Manual
61
ORing Industrial Networking Corp.
T
echnical Specifications
Network Interface
Ethernet
2x 10/100Base-T(X) which support Redundant Dual Ethernet or
Switch Mode support. Auto-recover less than 10ms
connector
RJ-45
Protection
Built-in1.5KV magnetic isolation
Protocols
ICMP, IP, TCP, UDP, DHCP, BOOTP, ARP/RARP, DNS, SNMP
MIB II, HTTPS, SSH
Serial Interface
Interface
1x RS232 / RS422 / 4(2)-Wire RS485.
Which can be configured by DS-Tool
Connector
Male DB9
Serial Baud Rate
110 bps to 460.8 Kbps
Data Bits
5, 6, 7, 8
Parity
odd, even, none, mark, space
Stop Bits
1. 1.5, 2
RS-232 signals
TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
(IDS-5012/IDS-5012+)
RS-422 signals
Tx+,Tx-, Rx+, Rx-,GND
RS-485 (4 wire) signals
Tx+,Tx-, Rx+, Rx-,GND
RS-485 (2 wire) signals
Data+, Data-,GND
Flow control
XON/XOFF, RTS/CTS, DTR/DSR
Serial Line Protection
Built-in15KV ESD protection
LED Indicators
PWR (1)(2) / Ready:
1) Red On: Power is on and booting up.
Red Blinking: Indicates an IP conflict, or DHCP or BOOTP server
