IDS-5012 Series
User’s Manual
ORing Industrial Networking Corp
30.
Force TX Interval Time
Force TX interval time is to specify the timeout when no data has been transmitted.
When the timeout is reached or TX buffer is full (4K Bytes), the queued data will be sent.
0 means disable. Factory default value is 0.
Table 5-9 Serial settings
Service Mode
– Virtual COM Mode
In Virtual COM Mode, The driver establishes a transparent connection between host
and serial device by mapping the Port of the serial server serial port to local COM
port on the host computer. Virtual COM Mode also supports up to 5 simultaneous
connections, so that multiple hosts can send or receive data by the same serial
device at the same time.
Figure 5-15 Virtual COM
