IDS-5012 Series
User’s Manual
ORing Industrial Networking Corp
58.
sending E-mail, log information or an SNMP trap after booting.
Software Reset (Warm
Start)
This refers to restart the computer without turning the power off. When performing a
warm start, DS will automatically send an E-mail, log information or SNMP trap after
reboot.
Login Failed
When an unauthorized access from the Console or Web interface, a notification will be
sent.
IP Address Changed
When IP address of device changed, a notification will be sent.
Password Changed
When password of device changed, a notification will be sent.
Access IP Blocked
When the host accesses the device with blocked IP addresses, a notification will be
sent.
Redundant Power
Change
When status of power changed, a notification will be sent.
Redundant Ethernet
Change
When status of Ethernet port changed, a notification will be sent.
DCD changed
When DCD (Data Carrier Detect) signal changes, it indicates that the modem
connection status has been changed. A Notification will be sent.
DSR changed
When DSR (Data Set Ready) signal changes, it indicates that the data communication
equipment is powered off. A Notification will be sent.
RI changed
When RI (Ring Indicator) signal changes, it indicates an incoming call. Notification will
be sent.
CTS changed
When CTS (Clear To Send) signal changes, it indicates that the transmission between
computer and DCE can proceed. A notification will be sent.
Port connected
In TCP Server Mode, when the device accepts an incoming TCP connection, this event
will be trigger. In TCP Client Mode, when the device has connected to the remote host,
this event will be trigger. In Virtual COM Mode, Virtual COM is ready to use. A
notification will be sent.
Port disconnected
In TCP Server/Client Mode, when the device lost the TCP link, this event will be trigger.
In Virtual COM Mode, When Virtual COM is not available, this event will be trigger. A
notification will be sent.
Table 5-22 System event conf