IDS-5012 Series
User’s Manual
41
ORing Industrial Networking Corp.
The following table describes the labels in this screen.
Label
Description
DHCP/BOOTP
Obtain the IP address automatically from DHCP server.
Static IP Address
Assigning an IP address manually.
Subnet Mask
Set the subnet mask to communicate on the network.
Gateway
Enter the IP address of the router in you network.
DNS Server
Enter the IP address of the DNS server to translate domain names into IP address.
Auto IP Report
The device server will report its status periodically. At DS-Tool->IP collection option
show the device server status. The report interval is 0 indicate disable this setting
(default). But you can set the other IP or Port.
Switch Mode
Redundant:
When the connection between master-link and LAN fails, the DS can
automatically switch to another LAN port within10mS, and still guarantees a
non-stop connection
Switch:
Daisy Chain support to reduce usage of switch ports.
Table 5-15 IP configuration
PPPoE setting
PPPoE (Point-to-Point Protocol over Ethernet), Device can use PPPoE mode to
connect the Network. Input the
“username”
and
“Password”, then click
“Connect”
button. If the device has been connected, the
“Status”
will become the
“Link up”
and device will get an IP address from PPPoE server. Click
“Return” button, return
the
“IP Configuration”
default page.
