Original inside NOVACAT 8600, Operator'S Manual, Page: 60 / 69

0600-GB SERVICE-DIRECT-CONTROL_384
SERVICE „DIRECT CONTROL“
GB
- 60 -
Y3 Distributing valve on the left cutter bar
Y4 Valve for the working mode “load sensing”
Y6 Seat valve on the right cutter bar
Y7 Seat valve on the centre cutter bar
Y9 Seat valve on the left cutter bar
bl blue
br brown
gn green
gr grey
gnge green/yellow
or orange
rt red
sw black
vi violet
ws white
Legend
1 Sensor on the right cutter bar
2 Sensor on the left cutter bar
3 Sensor on the centre cutter bar
4 Sensor on the rotor of the right conditioner
5 Sensor on the rotor of the centre conditioner
6 Sensor on the rotor of the left conditioner
7 Sensor on the front-end drive (p.t.o driving motor speed)
KST (Short circuit plug)*
- The short circuit plug is fitted to the sensor cable when the centre
cutter bar is mounted onto the front lifting gear of the tractor
(combination 2).
- The short circuit plug is removed when the centre cutter bar
is mounted onto the lifting gear of the cutter combination
(combination 3).
KR additional calculator for ISOBUS
Y1 Distributing valve on the right cutter bar
Y2 Distributing valve on the centre cutter bar
Combination 3
Combination 2
sensor
cable
cable
sensor
* not necessarily with version "alpha Motion"