Original inside NOVACAT 8600, Operator'S Manual, Page: 29 / 69

GB CONDITIONER
- 29 -
0500-GB AUFBEREITER_384
Dismounting and mounting the conditioner
Side mowers
Reduce spring tension before dismounting the
conditioner
Pin bolt (18) in the relative position (a)
- see chapter "MAINTENANCE"
Otherwise the danger exists that the mounting frame
of the cutter bar could swivel up in jerks and jolts
when uncoupling the lower link
1. Dismounting cutter bar from tractor
(only in cutter bar Combination 3)
2. Loosen locking mechanism (1) and swing protection
(2) up.
- engage protective frame in holder (3)
- left and right
3. Remove the belt protection (15) (Front-Mower)
3a. Remove the belt protection (2) and withdraw the drive
shaft (GW) from the gear (side mowers).