Original inside NOVACAT 8600, Operator'S Manual, Page: 46 / 69

- 46 -
0300_GB-HEBEL_379
MAINTENANCE AND SERVICE GB
Nova Cat 266F / 306F
Nova Alpin 226/266 Weiste
triangle
Nova Disc 225
Nova Cat 225/ 265 / 305 / 350
/ 400
Nova Alpin 226/266
Changing the Cutter Blades
(from 2004 model)
1. Insert lever from left or right side on the cutter
disc ”Pos A” until it stops.
2. Swing lever from ”pos. A” to ”pos. B” and push
the movable holder (30) down.
3. Remove cutter blade (M)
Storing the lever
- Place lever in the respective
holding pouch and secure.
- See diagrams for storage
places.
• blade bolts (31) for damage, wear and fitting
• holder (30) for damage, change in position and fitting
• borehole (32) for damage.
- Side surfaces must not show signs of
deformation
6. Install cutter blades
7. Visual check! Check that blade (M) is correctly
Pos
A
Pos
B
4. Clean forage remains and dirt away.
- around the bolts (31) and inside the borehole (32)
5. Check:
positioned between blade bolts (31) and holder
(30)
(see diagram) .
8. Swivel lever (H) to ”A” again and remove.