Original inside NOVACAT 8600, Operator'S Manual, Page: 16 / 69

GB
- 16 -
1000-GB DIRECT CONTROL_384
3. Deactivating the hydraulic function
- Press button, the integrated control light (LED) goes
off.
- The hydraulic function has been deactivated.
Safety warning: always deactivate the
selected function.
1. Press the button for desired function (11-15)
- The control light (LED) integrated in the button lights
up.
- Through pressing any other button, the hydraulic
function already selected will be deactivated, and the
new hydraulic function activated.
- Pressing button a second time deactivates the hydraulic
function once more.
2. Press one of the two arrow buttons (A1, B1)
- and the desired hydraulic function will be carried
out
10 ON / OFF button
Important! After switching off the control
device (OFF):
- switch hydraulic control valve to the 0
position. This is absolutely essential in
the case of tractors with an open hydraulic
system - otherwise the oil will overheat.
11 Swings all mower units up and down
• Conversion from operating to transport position
and vice versa (see button 15 also)
• “load sensing” hydraulic system (LED 11)
12 Swings front mower up and down
13 Swings left mower unit up and down
Rotor r.p.m on the conditioners
1019 min-1/844 min
-1
14 Swings right mower unit up and down
Rotor r.p.m on the conditioners
771 min-1/639 min
-1
15 Swings all mower units up and down in the
field transport position (headland turns)
A1 Downward swing movement "Lower"
Closed hydraulic system (LED A1)
B1 Upward swing movement "Raise"
Open hydraulic system (LED B1)
Meaning of the buttons on the control device
Note!
Press the relevant
button to
preselect the
desired hydraulic
function. If one
of the two arrow
buttons (A1,
B1) are pushed
afterwards, the
desired hydraulic
function will be
carried out.
If a malfunction
occurs: see
"Establsih
power supply"
in the chapter
"ATTACHING TO
TRACTOR"
How to carry out desired hydraulic function
Control light (LED)
If one of the
control lights
(LEDs) lights up,
it means that
that particular
function has been
activated.
Example:
- The top left
integrated control
light (LED) is on
- Swing action
of left mower
unit has been
activated
”DIRECT CONTROL” DEVICE