7
Valve & Silicon Rectifier Channel Controls
Valve & Silicon Rectifier Channel Controls
The RevivalDRIVE Hot Rod features two channels, selectable via footswitch. While the controls are
identical, the two channels offer a choice of rectifier styles.
Please note: the VALVE RECTIFIER channel can be switched to a second SILICON RECTIFIER channel
using the rear-panel MODE DIP switch. See
VOLUME:
In true vintage amp style, we’ve gone with the term “VOLUME”, but we could equally have called
this control “gain”. Turn clockwise for more overdrive, counter-clockwise to clean things up.
LOWS:
Having set the desired treble response using the PREAMP switch, the LOWS control allows you to
adjust the amount of bass pushing the drive circuitry.
OUTPUT:
Sets the overall output level of the channel. Adjust the VOLUME and OUTPUT controls to
achieve the desired combination of distortion and level.
BLEND:
This control lets you adjust the mix between the dry input signal (DRY) and the overdriven signal
created by the RevivalDRIVE Hot Rod (O.D.). From 100% O.D. when the control is turned fully clockwise,
you can progressively mix your original clean tone back in to add more clarity and definition by turning the
control counter-clockwise.
Please see notes on the
and the BLEND OVERRIDE function under
ON
O/O
Summary of Contents for REVIVALDRIVE HOT ROD EDITION
Page 1: ...OWNER S MANUAL Version 1 0 ...
Page 20: ......