9
Valve & Silicon Rectifier Channel Controls
BRIGHT-CAP:
This switch connects a capacitor to the VOLUME control, allowing high frequencies to
sidestep any attenuation in exactly the same way as the “Bright” switch found on many Fender amps or
using a Marshall’s bright channel.
Off (centre position):
No capacitor added – VOLUME control affects all
frequencies.
US (switch right):
High frequencies see maximum gain while the low
and mid frequencies remain clean, or overdriven, depending on where
the user sets the VOLUME control. Perfect for bright, sparkly lower-gain
sounds.
GB (switch left):
The effect is far more pronounced, with both upper-
mids and high frequencies allowed to bypass the volume control.
Mid Boost Controls
The RevivalDRIVE Hot Rod features a powerful mid-range boost that can be used to modify the overdriven
tone or provide a solo boost to help you cut through the mix. Fully variable in both level and centre
frequency, the MID BOOST can be applied to either channel or remotely activated using the optional
footswitch.
MID ASSIGN:
This three-way switch applies the MID BOOST to either the VALVE RECTIFIER channel
(switch left) or the SILICON RECTIFIER CHANNEL (switch right). With the switch in the central, F/SWITCH
position, the MID BOOST is deactivated but can be switched in at any time using the optional footswitch.
Please note: in F/SWITCH mode, the MID BOOST is applied to both the DRY and O.D. signals when
activated. In all cases, the MID BOOST is not active when the pedal is in BYPASS mode.
MID LEVEL:
Sets the level of the MID BOOST, from +2dB to +8.5dB.
MID FREQ:
Sets the centre frequency of the MID BOOST, ranging from 800Hz to 2kHz.
ON
O/O
Summary of Contents for REVIVALDRIVE HOT ROD EDITION
Page 1: ...OWNER S MANUAL Version 1 0 ...
Page 20: ......
