Oriental motor RBK Series, Operating Manual

Page: 5 / 48

2 Safety precautions
! 5 !
Installation
!"
To prevent the risk of electric shock, use the motor and driver for class I
equipment only.
!"
Install the motor and driver in their enclosures in order to prevent electric shock or
injury.
!"
Install the motor and driver so as to avoid contact with hands, or ground them to
prevent the risk of electric shock.
Connection
!"
Keep the driver’s input power voltage within the specified range to avoid electric
shock or fire.
!"
For the driver’s power supply use a DC power supply with reinforced insulation
on its primary and secondary sides. Failure to do so may result in electric shock.
!"
Connect the cables securely according to the wiring diagram in order to prevent
electric shock or fire.
!"
Do not forcibly bend, pull or pinch the power cable and motor cable. Doing so
may result in electric shock or fire.
!"
Do not touch the connection terminals of the driver immediately after the power is
turned off. To avoid electric shock of the residual voltage, wait more than
5 seconds after Power LED is off.
Operation
!"
Turn off the driver power in the event of a power failure, or the motor may
suddenly start when the power is restored and may cause injury or damage to
equipment.
!"
Do not turn the AWO (all windings off) input to “ON” while the motor is
operating. The motor will stop and lose its holding ability, which may result in
injury or damage to equipment.
Repair, disassembly and modification
!"
Do not disassemble or modify the motor or driver. This may cause electric shock
or injury. Refer all such internal inspections and repairs to the branch or sales
office from which you purchased the product.
Caution
General
!"
Do not use the motor and driver beyond their specifications, or electric shock,
injury or damage to equipment may result.
!"
Keep your fingers and objects out of the openings in the motor and driver, or fire,
electric shock or injury may result.
!"
Do not touch the motor or driver during operation or immediately after stopping.
The surfaces are hot and may cause a burn.
Transportation
!"
Do not hold the motor output shaft or motor cable. This may cause injury.