5 Installation
!
17
!
3.
Secure the driver with end
plate.
End plate
Note
!"
Do not use the mounting holes (M3, three locations) for the DIN rail
mounting plate provided in the back of the driver for any purpose other
than securing the DIN rail mounting plate.
!"
Be sure to use the supplied screws when securing the DIN rail mounting
plate. The use of screws that would penetrate 3 mm (0.12 in.) or more
through the surface of the driver may cause damage to the driver.
!"
Removing from DIN rail
Pull the DIN lever down until it locks using a flat
blade-parallel tip type screwdriver, and lift the
bottom of the driver to remove it from the rail.
Note
Use force of about 10 to 20 N (2.2 to 4.5 lb.)
to pull the DIN lever to lock it. Excessive force
may damage the DIN lever.
