Oriental motor ASD10A-K, Operating Manual, Page: 7 / 52

2 Safety precautions
－ 7 －
Operation
•
Use the actuator and driver only in the specified combination. An incorrect
combination may cause a fire.
•
Provide an emergency-stop device or emergency-stop circuit external to the
equipment so that the entire equipment will operate safely in the event of a system
failure or malfunction. Failure to do so may result in injury.
•
Before supplying power to the driver, turn all control inputs to the driver to
“OFF.” Otherwise, the actuator may start suddenly and cause injury or damage to
equipment.
•
To prevent bodily injury, do not touch the rotating parts (output table) of the
actuator during operation.
• Before moving the output table directly (as in the case of manual positioning),
confirm that the driver C.OFF (All windings off) input is “ON” to prevent injury.
•
The actuator’s surface temperature may exceed 70 °C (158 °F),
even under normal operating conditions. If an actuator is
accessible during operation, post a warning label shown in the
figure in a conspicuous position to prevent the risk of burns.
Warning label
•
Immediately when trouble has occurred, stop running and turn off the driver
power. Failure to do so may result in fire or injury.
Disposal
•
To dispose of the actuator or driver, disassemble it into parts and components as
much as possible and dispose of individual parts/components as industrial waste.