19
PHone settInGs
Alarm Settings
You can set an alarm time on this phone. When an alarm is set, the
alarm icon < > is shown on the handset display. When the alarm
time is reached, the alarm icon < > and “
ALARM ON
” flash
on the handset display, and the alarm tone rings for 45 seconds.
You can press any key to disable the alarm.
If the snooze function is activated, the alarm will sound again at
the end of the snooze period of seven minutes. You can also press
and hold <OFF> while the alarm is sounding, to stop the alarm and
turn off the snooze function.
NOTE
a. A key press will still disable the alarm even if the handset keypad is locked when the
alarm rings.
b. The alarm volume level is the same as the settings of the handset ringer volume. If the
handset ringer is set to
VOLUME OFF
, the alarm still sounds at
VOLUME 1
level.
c. During an external call or internal call, if an alarm is set and when the alarm time is
reached, the < > and “
ALARM ON
” will still flash. An alarm tone will be emitted
from the earpiece to alert the user the alarm time is reached. Once the user presses
any key or presses and holds <OFF> to disable the alarm, the display will revert to
the call duration.
d. During paging or ringing, the alarm will not sound when the alarm time is reached.
However, if the snooze function is enabled and there is no paging or ringing, the alarm
will sound again at the end of the snooze period.
Turn on/off the Alarm
1. Press <MENU/OK> and <UP/DOWN> to select
HS SETTINGS
.
2. Press <MENU/OK> and <UP/DOWN> to select
ALARM
.
3. Press <MENU/OK> and <UP/DOWN> to select
ON/OFF
.
4. Press <MENU/OK> to confirm.
NOTE
If ON is selected, you will be asked to set the alarm time.
Set the Alarm Time (If Alarm time is set to be ON)
1. Follow Steps 1 to 4 in Section “Turn on/off the Alarm”.
2. Enter the alarm time in 24 hour format.
3. Press <MENU/OK> to display "SNOOZE".
4. Press <MENU/OK> and <UP/DOWN> to select snooze
ON
or
OFF
.
5. Press <MENU/OK> to confirm.
Handset Settings
Set the Ringer Melody for Internal Calls
1. Press <MENU/OK> and <UP/DOWN> to select
HS SETTINGS
.
2. Press <MENU/OK> and <UP/DOWN> to select
RING SETUP.
3. Press <MENU/OK> and <UP/DOWN> to select
INT RING
.
4. Press <MENU/OK> and <UP/DOWN> to select the melody you
want to hear for internal calls.
NOTE
The respective melody will be played while browsing the ringtone list.
Press <MENU/OK> to confirm.